CAEB Round Hay Baler – Earth Tools

CAEB Round Hay Baler
Built well enough for everyday agricultural use, this mini-baler produces a 40 to 60 pound (depending on moisture of hay and how tight you roll it) bale measuring 21” x 23”, every 60 seconds. Bales are formed by a series of chain-driven aluminum rollers around the circumference of the bale bedroom – – no belts or bands to dry-rot or need adaptation. The drive chains are much heavier-duty than you would think necessary, no more power than these little tractors have… but that ’ s a thoroughly representation of how the CAEB ship’s company over-builds this thing. An automatic anoint system for the drive chains is criterion equipment. The Baler forms “ soft-core ” bales which allows some circulation of air through the bale center while the outside of the bale is rolled close to shed moisture if left outside. Bales are wrapped with a self-sticking UV resistant nylon net-wrap. The number of bales you can make on one roll of net-wrap varies according to the “ lap ” set you choose on the Baler : The most coarse is the “ 2.5 lap ” determine, which will do about 325 – 350 bales per roll and results in a dainty, durable bale… but, if you ’ ra not handling the bales much and actually want to conserve the gauze, the “ 1.5 lap ” setting will get you about 500 bales per roll. The 3.5 lap setting consumes more gauze, and would only be used for wrapping very “ crumbly ” materials like pot clippings or leaves. ( For those concerned with the measure of thriftlessness generated by the disposable net-wrap : The total weight / multitude of material used for the net-wrap is the same or less per pound of hay baled compared to the polypropylene wind normally used on square balers. [ This calculation done at the “ 2.5 lap ” setting for net-wrap…on the “ 1.5 lap ” sic, the amount used will be well less in bulk than poly wind ] )

Read more:   The Vampire Diaries: Why Stefan Killed Enzo In Season 8

Reading: CAEB Round Hay Baler – Earth Tools

An indicator on the side of the machine tells the hustler when the basel is fully formed, at which point the operator pulls a individual pry which trips the net-wrapping, wrap-cutting and chamber-opening cycle. The operator then sets the basel out of the chamber, closes the chamber, and resumes baling. As with the hayrake/tedder, the front wheels steer to guide the machine with a steering rod that comes out to the operator. This baler will bale hay, leaves, and even pine needles a long as the material is dry ( green hay can be made into silage using the CAEB Bale Wrapper [ it is all right for the material being baled to have INTERNAL moisture if you are going to make haylage/silage with the bale wrapping, but EXTERNAL moisture on the material being baled is a problem, as it will cause plug and can lead to baler price ! ] ).
The baler comes with one roll of net-wrap, a built-in basel counter, automatic chain oiler, parking brake and male a quick-coupling build into the PTO hookup flange. Requires tractor be equipped with female quick-coupling. ( note : We randomly test fresh balers here at Earth Tools before we ship them, to make certain they are working properly…we put ONE BALE through them. so, if you see a bit of hay on your new baler, this is why ! )

Read more:   NSO Full Form, Meaning, And Definition - Learners Anthem

Highslide JS

The CAEB baler works good on pine straw ( needles )
adenine well. [ Older “ crimson ” baler pictured ]

Highslide JS

An good afternoon ‘s knead

Click here for a video of basic use & features of the CAEB baler on walking tractor

Click here to view video of CAEB baler in action in the mountains of Italy

Click here to view video of CAEB haybaler net-wrap installation

Options include: Gathering wheels ( increase cartridge width from 28 ” to 38 ” ) ; and dual front tires ( recommended for slopes over 35 degrees, or in boggy terrain ) .
Fits BCS or Grillo walk-behind tractors 10hp & up gas, 8hp & up diesel.
NOTE REGARDING SHIPPING: To save our customers money and to reduce the chances of damage in transit ( amply assembled, they are so boastfully, they would cost well more to ship ), these units are shipped not-quite-fully assembled …the steering control condition legal profession needs to be installed ( 2 bolts ) and the height-adjustment-lever back bar needs to be installed ( 2 bolts ) .

NOW AVAILABLE: CAEB Balers to fit behind 4-wheel tractors!!

We have gotten several requests over the years to offer the balers CAEB makes to operate with larger equipment ( 4-wheel tractors, etc. ) …so we now offer these options ! See below for prices & features

Read more: Balamurali Ambati – Wikipedia

Read more:   18 Best Travel Affiliate Programs [2022 Update]

Highslide JS

CAEB “ TPL ” baler to pull behind tractor with 540 RPM
PTO shaft and hydraulic hookup

Highslide JS

CAEB “ TML ” baler with on-board 13hp Honda engine
for pulling behind ATVs, garden tractors, etc .

  • Item 200.00.000-B (fits BCS 739 – 948) MSRP: $10995 $9500
  • (Requires additional accessories to fit BCS 660, 750, 948 or Grillo G131)
  • Item 200.00.000-G (fits Grillo G85d [10hp] – G107) MSRP: $10995 $9500
  • Item 200.00.000-G110 (fits Grillo G110) MSRP: $10995 $9500
  • Gathering wheels for baler (Item GATHWH) MSRP: $550 $495
  • Dual wheels for baler (Item DUALWH) MSRP: $399 $350
  • Extra Rolls of net wrap for baler (Item ET NETWRAP) MSRP: $90 $79 Each

CAEB Round Hay Baler “TPL” Model to pull behind 4-wheel tractor (may have to be special-ordered)

  • Requires tractor have at least 15hp at PTO
  • Requires 540 RPM PTO and at least single-action hydraulic hookup on tractor
  • Requires that tractor be equipped with “upper” drawbar (where 3-point hitch top-link would normally be…ABOVE the PTO shaft)
  • MSRP: $13,500 $11,500
  • Gathering wheels for baler (Item GATHWH) MSRP: $550 $495
  • Extra Rolls of net wrap for baler (Item ET NETWRAP) MSRP: $90 $79 Each

CAEB Round Hay Baler “TML” Model with On-Board Honda 13hp engine – to pull behind ATV, UTV, Garden tractor, truck, etc. (may have to be special-ordered)

  • Requires a ball-hitch on whatever is pulling the baler
  • MSRP: $15,500 $13,500
  • Gathering wheels for baler (Item GATHWH) MSRP: $550 $495
  • Extra Rolls of net wrap for baler (Item ET NETWRAP) MSRP: $90 $79 Each
informant : https://shayski.com
Category : Uncategorized

Leave a Reply

Your email address will not be published.

Back To Top